Jeep Flat Fender Leaf Spring Shackles With Bushings, Grease-able Hardware and Towbar Options. 1/2″ lift


SKU: N/A Category:

New! Now available! 

Our shackles are available in a variety combinations and options.

  1. Sold in 2 Pc. or 4 Pc. shackle sets, in case you only need one set for either front or rear or you want a set of 4 for both front and rear! 
  2. With or without Grease-able hardware. If you don’t want Grease-able hardware they come with grade 8 hardware complete with all nuts and bolts needed.
  3. With or with out the shouldered black urethane bushings. If you don’t want the bushings you will need to get them somewhere else as they are required for installation.
  4. The last option is the tow bar plates that bolt on to the outside of the shackle to create a point of attachment for a tow bar. These plates come with one 1/2″ bolt per shackle for the spacer and a 1″ .250 wall DOM spacer per side to weld to a tow bar.  

Just go through the menu and select what you want!

The shackles are 1″ longer than stock and are constructed of 1/4-inch laser-cut steel. They are a one piece H design for strength and to prevent lateral movement.


41-45 MB

41-45 GPW

46-49 CJ-2A

49-53 CJ-3A

53-64 CJ-3B

55-58 CJ-5

50-52 M38

58-75 CJ-5

52-66 M38A1



Please Note: Do not over tighten shackle bolts. They just need to be snug but not crushing the bushing shoulder. The all metal lock nut will not back off.

Price includes Free shipping to your door in the lower 48!


2 Shackles Or 4 Shackles

2 Shackles, Fits front or Rear, Full set of 4, Front and Rear

Grease-able Hardware

Yes! I Want Grease-able HW, No, Regular Grade 8 Hardware is fine

Urethane Bushings

Yes! Include Bushings!, No Thanks, I have My Own

Front Shackle Tow Bar Mounting Plates

Yes! I want tow bar Plates, No Thanks